LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> RX 400h FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Pedal >> Disassembly

Brake Pedal: Disassembly

  1. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Remove the 2 bolts and the brake pedal stroke sensor assembly.
    Fig 1: Identifying Brake Pedal Stroke Sensor Assembly Bolts
    G04113378Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE STOP LIGHT SWITCH ASSEMBLY 
    1. Loosen the stop light switch lock nut and remove the stop light switch assembly from the brake pedal support assembly.
  3. REMOVE BRAKE PEDAL 
    1. Remove the nut, the washer, the bolt and the brake pedal from the brake pedal support assembly.
    Fig 2: Identifying Brake Pedal
    G04113379Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE BRAKE PEDAL PAD 
  5. REMOVE STOP LIGHT SWITCH CUSHION 
  6. REMOVE BRAKE PEDAL SHAFT COLLAR 
  7. REMOVE BRAKE PEDAL BUSHING 
    1. Remove the 2 brake pedal bushings from the brake pedal.
  8. REMOVE BRAKE PEDAL SUPPORT 
    NOTE: Do not disassembly the upper support portion. If disassembled, be sure to replace it with new parts.
    Fig 3: Identifying Brake Pedal Support
    G04113380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals