DTC Check / Clear

CHECK DTC
1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch on.
3. Enter the following menus: DIAGNOSIS / OBD/MOBD / BODY / DTC INFO.
4. Check the DTCs on the tester screen.
  
  Fig 1: Identifying Intelligent Tester To DLC3
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Refer to the intelligent tester operator's manual for further details.
CLEAR DTC
1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch on.
3. Erase the DTCs by following the prompts on the tester screen.
4. Enter the following menus: DIAGNOSIS / OBD/MOBD / BODY / DTC INFO.
  HINT:
  
  Refer to the intelligent tester operator's manual for further details.