Typical Malfunction Thresholds
TYPICAL MALFUNCTION THRESHOLDS CHART
| One of the following condition is met | - |
| A. All of the following conditions are met | - |
| Battery voltage | 11 V or more and Less than 13 V |
| Target duty ratio | Less than 70 % |
| Output signal duty ratio | 100 % |
| B. All of the following conditions are met | - |
| Battery voltage | 13 V or more |
| Target duty ratio | Less than 80 % |
| Output signal duty ratio | 100 % |
| C. All of the following conditions are met | - |
| Current cut status | Not cut |
| Output signal duty ratio | 3 % or less |