Front No. 2 Speaker: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working. (See AIRBAG SYSTEM )
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (See REMOVAL )
REMOVE CONSOLE PANEL UPPER FRONT (See REMOVAL )
REMOVE INSTRUMENT PANEL FINISH PANEL LOWER (See REMOVAL )
REMOVE RADIO RECEIVER (See 5 )
REMOVE MULTI-DISPLAY (See REMOVAL )
REMOVE NO.1 SPEAKER HOLE COVER
1. Disengage the 4 clips.
2. Remove the No.1 speaker hole cover by pushing it up from the under side of the instrument panel.
  
  Fig 1: Identifying No.1 Speaker Hole Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT NO.2 SPEAKER
1. Remove the 2 bolts.
  
  Fig 2: Identifying Front No.2 Speaker
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the connector and front No.2 speaker.