Front No. 2 Speaker: Installation

INSTALL FRONT NO.2 SPEAKER
1. Connect the connector.
2. Install the front No.2 speaker with the 2 bolts.
  
  Fig 1: Identifying Front No.2 Speaker
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO.1 SPEAKER HOLE COVER
1. Engage the 4 clips and install the No.1 speaker hole cover.
  
  Fig 2: Identifying No.1 Speaker Hole Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL MULTI-DISPLAY (See REMOVAL )
INSTALL RADIO RECEIVER (See 1 )
INSTALL INSTRUMENT PANEL FINISH PANEL LOWER (See INSTALLATION )
INSTALL CONSOLE PANEL UPPER FRONT (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal. (See INITIALIZATION )