Horn Relay: Inspection
- INSPECT FUSE (HORN)
- Check the resistance of the HORN fuse.
Standard: Below 1 Ω
- Check the resistance of the HORN fuse.
- INSPECT HORN RELAY
- Remove the horn relay from the fusible link block.
- Measure the resistance according to the value(s) in the table below.
Standard
TESTER CONNECTION - SPECIFIED CONDITION TABLETester Connection Condition Specified Condition 3 - 5 Always 10 kΩ or higher 3 - 5 When battery voltage is applied to terminals 1 and 2 Below 1 Ω