Front No. 2 Speaker: Installation

INSTALL FRONT NO. 2 SPEAKER
1. Connect the connector.
2. Install the front No.2 speaker with the 2 bolts.
Fig 1: Installing Front No.2 Speaker
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 SPEAKER HOLE COVER
1. Engage the 4 clips and install the No.1 speaker hole cover.
INSTALL MULTI-DISPLAY (See INSTALLATION )
INSTALL RADIO RECEIVER (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL LOWER (See INSTALLATION )
INSTALL CONSOLE PANEL UPPER FRONT (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal. (See PRECAUTION )

Fig 2: Installing No.1 Speaker Hole Cover
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002