Circuit Description
WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
This skid control ECU inputs the stop light switch signal and detects the status of brake operation. The skid control ECU has an open detection circuit. If an open in the stop light switch input line or GND side stop light circuit is detected when the stop light switch is off, this DTC is output.
DIAGNOSTIC TROUBLE CODE TABLE
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1249/49 | ECU terminal IG1 voltage is 9.5 to 17.0 V, ABS is in non-operation, and an open in stop light switch circuit continues for 0.3 seconds or more. |
|