Circuit Description
WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
The ABS solenoid relay is built in the master cylinder solenoid. This relay supplies power to each ABS solenoid. If the initial check is OK, after the ignition switch is turned to the ON position, the relay goes on.
DIAGNOSTIC TROUBLE CODE TABLE
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C0278/11 | When either of the following conditions is detected:
|
|
| C0279/12 | The following condition continues for at least 0.2 seconds.
|
|