Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| The monitor will runs whenever these DTCs are not present | None |
|---|---|
| Either of the following condition is met | Condition 1 or 2 |
| 1. Starter | OFF |
| 2. Engine RPM | 1,500 rpm or less |
| Either of the following condition is met | Condition (a) or (b) |
| (a) All of the following conditions are met | - |
| Engine RPM | 500 rpm or less |
| Battery voltage | 6 V or more |
| (b) All of the following conditions are met | - |
| Engine RPM | More than 500 rpm |
| Battery voltage | 10 V or more |
| Number of sparks after CPU is reset | 5 sparks or more |