LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (A960E)) >> Speed Sensor >> Installation

Speed Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2 SENSOR) 
    1. Coat a new O-ring with ATF and install it to the transmission revolution.
    2. Install the transmission revolution sensor with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    3. Connect the transmission revolution sensor connector.
    Fig 1: Identifying Transmission Revolution Sensor Connector
    G04045836Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT SENSOR) 
    1. Coat a new O-ring with ATF and install it to the transmission revolution.
    2. Install the transmission revolution sensor with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      Fig 2: Identifying Transmission Revolution Sensor With Bolt
      G04045837Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the transmission revolution sensor connector O-Ring.
scientia non olet · About LEMON Manuals