LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (A960E)) >> Speed Sensor >> Inspection

Speed Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Measure the resistance according to the value(s) in the table below.

    Standard resistance 

    TESTER CONNECTION SPECIFIED CONDITION CHART

    Tester Connection Specified Condition (20°C (68°F))
    1 - 2 560 to 680 Ω
    Fig 1: Inspecting Transmission Revolution Sensor (NT)
    G04045834Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    If the resistance value is not as specified, replace the speed sensor.

  2. INSPECT TRANSMISSION REVOLUTION SENSOR (SP2) 
    1. Measure the resistance according to the value(s) in the table below.

    Standard resistance 

    TESTER CONNECTION SPECIFIED CONDITION CHART

    Tester Connection Specified Condition (20°C (68°F))
    1 - 2 560 to 680 Ω

    If the resistance value is not as specified, replace the speed sensor.

    Fig 2: Inspecting Transmission Revolution Sensor (SP2)
    G04045835Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals