LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (A960E)) >> Park / Neutral Position Switch >> Adjustment

Park / Neutral Position Switch: Adjustment

WARNING: This page is about a different variant/trim than selected.
  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    1. Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.
    2. Align the groove and the neutral alignment mark line.
    3. Hold the switch in position and tighten the bolt.

      Torque: 13 N*m (130 kgf*cm, 9 ft.*lbf) 

    4. After adjustment, perform the inspection (see PARK / NEUTRAL POSITION SWITCH  ).
    Fig 1: Aligning Groove And Neutral Alignment Mark Line
    G04045864Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals