Oil Pump: Disassembly

WARNING: This page is about a different variant/trim than selected.

REMOVE FRONT OIL PUMP BODY O-RING
1. Remove the O-ring from the oil pump assembly.
Fig 1: Identifying Front Oil Pump Body O-Ring
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
FIX OIL PUMP ASSEMBLY
1. Place the oil pump body on the torque converter clutch.
Fig 2: Placing Oil Pump Body On Torque Converter Clutch
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH DRUM OIL SEAL RING
1. Remove the 3 oil seal rings.
Fig 3: Identifying Oil Seal Rings
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STATOR SHAFT ASSEMBLY
1. Remove the 14 hexagon bolts and the stator shaft from the oil pump body.
Fig 4: Identifying Stator Shaft And Oil Pump Body
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP BODY O-RING
1. Remove the O-ring from the oil pump body.
2. Remove the oil pump body from the torque converter clutch.
Fig 5: Identifying Front Oil Pump Body O-Ring
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP DRIVE GEAR
1. Remove the front oil pump drive gear.
Fig 6: Identifying Front Oil Pump Drive Gear
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP DRIVEN GEAR
1. Remove the front oil pump driven gear.
Fig 7: Identifying Front Oil Pump Driven Gear
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP OIL SEAL
1. Using a screwdriver with its tip wrapped with tape, remove the oil seal.
  NOTE: Be careful not to damage the bushing and the oil pump body.
Fig 8: Identifying Front Oil Pump Oil Seal
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002