LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (A960E)) >> Automatic Transmission System >> DTC P2714 Pressure Control Solenoid "D" Performance (Shift Solenoid Valve SLT) >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different variant/trim than selected.

ON malfunction: 

TYPICAL ENABLING CONDITIONS CHART

The monitor will run whenever this DTC is not present. None
Turbine speed sensor circuit Not circuit malfunction
Output speed sensor circuit Not circuit malfunction
TFT sensor circuit Not circuit malfunction
Shift solenoid valve S1 circuit Not circuit malfunction
Shift solenoid valve S2 circuit Not circuit malfunction
Shift solenoid valve S3 circuit Not circuit malfunction
Shift solenoid valve S4 circuit Not circuit malfunction
Shift solenoid valve SR circuit Not circuit malfunction
Shift solenoid valve SL1 circuit Not circuit malfunction
Shift solenoid valve SL2 circuit Not circuit malfunction
Shift solenoid valve SLT circuit Not circuit malfunction
ECT (Engine coolant temperature) sensor circuit Not circuit malfunction
KCS sensor circuit Not circuit malfunction
ETCS (Electric throttle control system) Not system down
Transmission range "D"
ECT 40°C (104°F) or more
Spark advance from Max. retard timing by KCS control 0°CA or more
Engine Starting
TFT sensor circuit 10°C (50°F) or more