Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
P0982:
Range check (Low resistance).
TYPICAL ENABLING CONDITIONS CHART
| The monitor will run whenever this DTC is not present. | None |
| Shift solenoid valve S4 | ON |
| Battery voltage | 8 V or more |
| Engine switch | ON |
| Starter | OFF |
P0983:
Range check (High resistance).
TYPICAL ENABLING CONDITIONS CHART
| The monitor will run whenever this DTC is not present. | None |
| Shift solenoid valve S4 | OFF |
| Battery voltage | 8 V or more |
| Engine switch | ON |
| Starter | OFF |