Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
One of the following conditions is met: Condition (A), (B) or (C)
Condition (A):
TYPICAL MALFUNCTION THRESHOLDS CHART
| Number of the following signal input at the same time | 2 or more |
| P switch | ON |
| N switch | ON |
| R switch | ON |
| D switch | ON |
Condition (B):
When shift lever is in S position, one of the following conditions is met
TYPICAL MALFUNCTION THRESHOLDS CHART
| P switch | ON |
| N switch | ON |
| R switch | ON |
Condition (C):
All of following conditions are met
TYPICAL MALFUNCTION THRESHOLDS CHART
| P switch | OFF |
| N switch | OFF |
| R switch | OFF |
| D switch | OFF |