LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission (A760H)) >> Pattern Select Switch >> Installation

Pattern Select Switch: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL NO. 1 PATTERN SELECT SWITCH ASSEMBLY 
    1. Engage the 2 claws and install the pattern select switch to the switch base.
    Fig 1: Installing Claws & Pattern Select Switch To Switch Base
    G04045312Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  2. INSTALL SWITCH BASE 
    1. Engage the 4 claws and install the switch base to the lower instrument panel finish panel.
    Fig 2: Installing Claws & Switch Base To Lower Instrument Panel Finish Panel
    G04045313Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See step 24 in  INSTALLATION  ) 
  4. INSTALL SIDE INSTRUMENT PANEL LH (See step 26 in  INSTALLATION  ) 
  5. INSTALL FRONT DOOR OPENING TRIM COVER LH (See step 27 in  INSTALLATION  ) 
  6. INSTALL FRONT DOOR SCUFF PLATE LH (See step 88 in  INSTALLATION  ) 
scientia non olet · About LEMON Manuals