Park/Neutral Position Switch: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
1. Disconnect the neutral start switch connector.
  
  Fig 1: Disconnecting Neutral Start Switch Connector
  Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. Using a screwdriver, unstake the lock washer.
3. Remove the lock nut and lock washer.
  
  Fig 2: Removing Lock Nut & Lock Washer
  Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. Remove the bolt and park/neutral position switch assembly.
Fig 3: Removing Bolt & Park/Neutral Position Switch Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.