LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission (A760H)) >> Automatic Transmission System >> DTC U0100 Lost Communication with ECM/PCM "A" >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC U0100) 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the tester ON.
    4. Enter the following menus: DIAGNOSIS / ENHANCED OBD II / DTC INFO / CURRENT CODES.
    5. Read DTCs.

    Result 

    OTHER DTC OUTPUT (IN ADDITION TO DTC U0100)

    Display (DTC output) Proceed to
    U0100 A
    U0100 and other DTCs B

    B: GO TO  DIAGNOSTIC TROUBLE CODE TABLE  

    A: REPLACE ECM 

scientia non olet · About LEMON Manuals