DTC P2716 Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT): Description

WARNING: This page is about a different variant/trim than selected.

DTC DETECTION CONDITION

DTC No.	DTC Detection Condition	Trouble Area
P2716	Open or short is detected in shift solenoid valve SLT circuit for 1 second or more while driving (1-trip detection logic).	Open or short in shift solenoid valve SLT circuit Shift solenoid valve SLT ECM

Reference (Using an oscilloscope):

Check the waveform between the terminals SLT+ and SLT- of the ECM connector

Standard:

Refer to the illustration.

SLT+ AND SLT-

Terminal	SLT+ - SLT-
Tool setting	5 V/DIV., 1 ms./DIV.
Vehicle condition	Engine idle speed

Fig 1: Identifying Oscilloscope Voltage Waveform Signal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.