Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
P0979:
Range check (Low resistance)
P0979 - RANGE CHECK (LOW RESISTANCE)
| The monitor will run whenever this DTC is not present. | None |
|---|---|
| Shift solenoid valve S3 | ON |
| Battery voltage | 8 V or more |
| Engine switch | ON |
| Starter | OFF |
P0980:
Range check (High resistance)
P0980 - RANGE CHECK (HIGH RESISTANCE)
| The monitor will run whenever this DTC is not present. | None |
|---|---|
| Shift solenoid valve S3 | OFF |
| Battery voltage | 8 V or more |
| Engine switch | ON |
| Starter | OFF |