Ventilation Valve: Installation

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VENTILATION VALVE
1. Install the ventilation valve.
  1. Apply adhesive to 2 or 3 threads.
    Adhesive: Part No. 08833-00070, THREE BOND 1324 or equivalent.
  2. Install the ventilation valve.
    Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)
    
    Fig 1: Applying Adhesive On Threads Of Ventilation Valve
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT VENTILATION HOSE
1. Connect the ventilation hose to the ventilation valve.
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )

Fig 2: Identifying Ventilation Hose
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002