Fuel Pump Resistor: Inspection

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FUEL PUMP RESISTOR
1. Measure the resistance between the terminals.
  
  Fig 1: Measuring Resistance Between Fuel Pump Resistor Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Standard resistance: 0.30 to 0.34 Ω at 20°C (68°F)
  
  If the result is not as specified, replace the fuel pump resistor.