Fuel Pressure Pulsation Damper: Removal
WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- DISCHARGE FUEL SYSTEM PRESSURE
HINT:
See FUEL SYSTEM .
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
- REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
- REMOVE FUEL PRESSURE PULSATION DAMPER
- Using SST, remove the fuel pressure pulsation damper and 2 gaskets, and disconnect the fuel tube from the fuel pump.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
SST 09612-24014 (09617-24011)
- Using SST, remove the fuel pressure pulsation damper and 2 gaskets, and disconnect the fuel tube from the fuel pump.