LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Starting (2GR-FSE)) >> Smart Access System With Push-Button Start >> DTC B2286 Runnable Signal Malfunction >> Description

DTC B2286 Runnable Signal Malfunction: Description

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

The power source control ECU and the ECM are connected by a cable and the BEAN. If the cable information and BEAN information are inconsistent, this DTC will be output.

DTC DETECTION CONDITION CHART

DTC No. DTC Detection Condition Trouble Area
B2286 Cable and BEAN between the power source control ECU and ECM are inconsistent
  • Power source control ECU
  • SFI system
  • Wire harness