Typical Enabling Conditions
WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
All:
TYPICAL ENABLING CONDITIONS
| Monitor will run whenever these DTCs are not present | - |
CKP sensor signal check when starter OFF:
TYPICAL ENABLING CONDITIONS
| Engine rpm | 600 rpm or more |
| Time after starter ON to OFF | 3 seconds or more |
CKP sensor signal check when starter ON:
TYPICAL ENABLING CONDITIONS
| Starter | ON |
CKP sensor pulse check:
TYPICAL ENABLING CONDITIONS
| Battery voltage | 7 V or higher |
| Starter | ON |