LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Control System (2GR-FSE)) >> SFI System >> DTC P0125 Insufficient Coolant Temperature for Closed Loop Fuel Control >> Description

DTC P0125 Insufficient Coolant Temperature for Closed Loop Fuel Control: Description

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

A thermistor is built into the Engine Coolant Temperature (ECT) sensor, of which the resistance value varies according to the ECT. The structure of the sensor and its connection to the ECM are the same as those of the Intake Air Temperature (IAT) sensor.

DTC DETECTION CONDITION

DTC No. DTC Detection Condition Trouble Area
P0125 Engine coolant temperature (ECT) does not reach closed-loop enabling temperature for 20 minutes (this period varies with ECT when engine start)
  • Engine coolant temperature sensor
  • Cooling system
  • Thermostat