LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Control System (2GR-FSE)) >> SFI System >> DTC P0013 Camshaft Position "B" Actuator Circuit / Open (Bank 1); DTC P0023 Camshaft Position "B" Actuator Circuit / Open (Bank 2) >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL MALFUNCTION THRESHOLDS

One of the following conditions is met: -
A. All of the following conditions are met: -
Battery voltage 11 to 13 V
Target duty ratio Less than 70%
Output signal duty ratio 100 %
B. All of the following conditions are met: -
Battery voltage 13 V or more
Target duty ratio Less than 80%
Output duty ratio 100 %
C. All of the following conditions are met: -
Current cut status Not cut
Output signal duty ratio 3% or less