LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Control System (2GR-FSE)) >> Mass Air Flow Meter >> Removal

Mass Air Flow Meter: Removal

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL  ) 
  2. REMOVE ENGINE ROOM SIDE COVER RH (See  REMOVAL  ) 
  3. REMOVE MASS AIR FLOW METER 
    1. Disconnect the MAF meter connector.
      Fig 1: Identifying MAF Meter Connector
      G04054906Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and MAF meter.
    3. Remove the O-ring from the MAF meter.
      Fig 2: Identifying Mass Air Flow Meter
      G04054907Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002