LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Brake Control) >> VEHICLE STABILITY CONTROL SYSTEM (w/ VDIM) >> DTC C1305/21 Solenoid Identification Circuit >> Description

DTC C1305/21 Solenoid Identification Circuit: Description

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

The skid control ECU receives solenoid identification signals from terminals SSEL and SEL2. The ECU specifies control characteristics of the brake actuator by monitoring the difference in the holding solenoid (FRA, FLA, RRA and RLA) current, which is caused by characteristics of each actuator.

Fig 1: ECU Specifies Control Characteristics
G04052135Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DIAGNOSIS TROUBLE CODE CHART

DTC No. DTC Detection Condition Trouble Area
C1305/21 Immediately after the engine is started, an open or short in the solenoid characteristics identification circuit continues for 0.21 seconds or more.
  • Internal solenoid identification circuit of the brake actuator assembly
  • Skid control ECU