LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Brake Control) >> VEHICLE STABILITY CONTROL SYSTEM (w/ VDIM) >> DTC C1300/62 Skid Control ECU Malfunction >> Description

DTC C1300/62 Skid Control ECU Malfunction: Description

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the computer by self diagnosis.

DIAGNOSIS TROUBLE CODE CHART

DTC No. DTC Detection Condition Trouble Area
C1300/62 Malfunction in the skid control ECU. Skid control ECU
NOTE: When replacing the skid control ECU, perform zero point calibration (See CALIBRATION  ).
  1. REPLACE SKID CONTROL ECU 
    1. Replace the skid control ECU (See SKID CONTROL ECU (W/ VDIM)  ).

    NEXT: END