LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Brake Control) >> VEHICLE STABILITY CONTROL SYSTEM (w/ VDIM) >> DTC C1225/25 SM Solenoid Circuit >> Description

DTC C1225/25 SM Solenoid Circuit: Description

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS TROUBLE CODE CHART

DTC No. DTC Detection Condition Trouble Area
C1225/25 When any of the following is detected:
  • While outputting switching solenoid (SM1 or SM2) ON, overcurrent continues for 0.05 seconds or more.
  • While outputting switching solenoid (SM1 or SM2) OFF, an open circuit continues for 0.05 seconds or more.
  • While outputting switching solenoid (SM1 or SM2) ON, an open circuit continues for 0.1 seconds or more.
  • While outputting switching solenoid (SM1 or SM2) OFF, current continues to be applied for 0.1 seconds or more.
  • Short to GND in the switching solenoid (SM1 or SM2) continues for 0.1 seconds or more.
  • Switching solenoids SM1 and SM2 is shorted for 0.1 seconds or more.
  • SM1 or SM2 circuit
  • Skid control ECU