LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Brake Control) >> TRACTION OFF SWITCH (for 2WD) >> Inspection

TRACTION OFF SWITCH (for 2WD): Inspection

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRACTION OFF SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTION AND SPECIFIED CONDITION CHART

      Tester Connection Switch Condition Specified Condition
      3 - 4 Pressed Below 1 Ω
      3 - 4 Not pressed 10 kΩ or higher

      If the value is not as specified, replace the traction off switch.

scientia non olet · About LEMON Manuals