LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Automatic Transmission) >> Automatic Transmission System >> DTC P2759 Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical (Shift Solenoid Valve SLU) >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS

The monitor will run whenever this DTC is not present. None
Solenoid current cut status Not cut
CPU commanded duty 19% or more
Battery voltage 8 V or more
Engine switch ON
Starter OFF