LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Automatic Transmission) >> Automatic Transmission System >> DTC P2757 Torque Converter Clutch Pressure Control Solenoid Performance (Shift Solenoid Valve SLU) >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

Both of the following condition are met: OFF malfunction (A) and (B)

OFF malfunction (A) 

TYPICAL ENABLING CONDITIONS

Engine speed - Turbine speed (NE - NT) 70 rpm or more

OFF malfunction (B) 

TYPICAL ENABLING CONDITIONS

Turbine speed/Output speed (NT/NO) Less than 3.40, or more than 7.50

ON malfunction (A) 

2 detections are necessary per driving cycle:

1st detection; temporary flag ON

2md detection; pending fault code ON

Vehicle speed must be under 6.2mph (10 km/h) once before 2nd detection.

TYPICAL ENABLING CONDITIONS

Engine speed - Turbine speed (NE - NT) Less than 20 rpm