LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Automatic Transmission) >> Automatic Transmission System >> DTC P0979 Shift Solenoid "C" Control Circuit Low (Shift Solenoid Valve S3); DTC P0980 Shift Solenoid "C" Control Circuit High (Shift Solenoid Valve S3) >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

P0979: 

Range check (Low resistance)

TYPICAL ENABLING CONDITIONS

The monitor will run whenever this DTC is not present. None
Shift solenoid valve S3 ON
Battery voltage 8 V or more
Engine switch ON
Starter OFF

P0980: 

Range check (High resistance)

TYPICAL ENABLING CONDITIONS

The monitor will run whenever this DTC is not present. None
Shift solenoid valve S3 OFF
Battery voltage 8 V or more
Engine switch ON
Starter OFF