System Description
WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
The 1-2 shift valve performs shifting to 1st gear and other gears.
DTC TROUBLE DETECTION CONDITION
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0781 | 1-2 shift valve malfunction: Shifting to 2nd and 4th gears is impossible. When the ECM directs the gearshift to switch to 5th or 6the gear, the engine overruns (clutch slips). (2-trip detection logic) (a) and (b), or (a) and (c)
|
|
HINT:
- Gear positions in the event of a solenoid valve mechanical problem:GEAR POSITIONS
ECM command gearshift 1st 2nd 3rd 4th 5th 6th Actual gear position under malfunction 1st 3rd (1) (1) (1) Neutral - Gear position during fail-safe operation:
If any malfunction is detected, the ECM changes into the fail-safe mode to shift into the gear positions as shown in the table below.
GEAR POSITIONSGear position under normal conditions 1st 2nd 3rd 4th 5th 6th Actual gear position under fail safe mode ((1)) 1st ((1)) 3rd 3rd 3rd (1) Under engine braking, downshifting to 1st or 2nd gear is prohibited.