Typical Enabling Conditions
WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever this DTC is not present. | P0115 - P0118 (ECT sensor) P0125 (Insufficient ETC for Closed Loop) P0500 (VSS) P0748 - P0798 (Trans solenoid (range)) |
| Solenoid current cut status | Not cut |
| CPU commanded duty | 19% or more |
| Battery voltage | 11 V or more |
| Engine Switch | ON |
| Starter | OFF |