LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Automatic Transmission) >> Automatic Transmission System >> DTC P0748 Pressure Control Solenoid "A" Electrical (Shift Solenoid Valve SL1) >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS

The monitor will run whenever this DTC is not present. P0115 - P0118 (ECT sensor)
P0125 (Insufficient ECT for Closed Loop)
P0500 (VSS)
P0748 - P0798 (Trans solenoid (range))
Solenoid current cut status Not cut
CPU commanded duty 19% or more
Battery voltage 11 V or more
Engine Switch ON
Starter OFF