Typical Enabling Conditions
WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
The stop light switch remains on during GO and STOP 10 times.
GO and STOP is defined as follows;
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever this DTC is not present. | None |
| GO: (Vehicle speed is 18.63 mph (30 km/h) or more) | Once |
| STOP: (Vehicle speed is less than 1.86 mph (3 km/h)) | Once |
| Starter | OFF |
| Battery voltage | 8 V or more |
| engine switch | ON |