LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Ignition (2GR-FSE)) >> Ignition Coil >> Removal

Ignition Coil: Removal

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE V-BANK COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  3. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL  ) 
  4. REMOVE ENGINE ROOM SIDE COVER RH (See  REMOVAL  ) 
  5. REMOVE ENGINE ROOM SIDE COVER LH (See  REMOVAL  ) 
  6. DISCONNECT NO. 2 VENTILATION HOSE 
    1. Disconnect the ventilation hose from the cylinder head.
  7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY 
    Fig 1: Locating Ventilation Hose To Cylinder Head Cover
    G04018097Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE IGNITION COIL ASSEMBLY 
    1. Disconnect the 2 wire harness clamps.
      Fig 2: Identifying 2 Wire Harness Clamps
      G04052650Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 6 ignition coil connectors.
    3. Remove the 6 bolts and the 6 ignition coil assemblies.
      Fig 3: Identifying Bolts And 6 Ignition Coil Assemblies
      G04052651Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals