LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (4GR-FSE) >> Drive Belt >> Removal

Drive Belt: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL   ) 
  2. REMOVE NO. 1 INLET AIR CLEANER (See Step 19 in  REMOVAL   ) 
  3. REMOVE V-BANK COVER SUB-ASSEMBLY (See Step 4 in  REMOVAL   ) 
  4. REMOVE V-RIBBED BELT 
    1. Release the belt tension by turning the belt tensioner counterclockwise, and remove the V-ribbed belt from the belt tensioner.
      Fig 1: Releasing Belt Tension
      G04043982Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. While turning the belt tensioner counterclockwise, align with its holes, and then insert the 5 mm bi-hexagon wrench into the holes to fix the belt tensioner.
Fig 2: Inserting Bi-Hexagon Wrench Into Holes To Fix Belt Tensioner
G04043983Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals