LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Differential >> FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD) >> Removal

FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD): Removal

  1. DRAIN FRONT DIFFERENTIAL OIL 
    1. Remove the differential filler plug and gasket.
    2. Remove the differential drain plug and gasket, and drain the oil.
  2. REMOVE ENGINE ASSEMBLY 

    (See REMOVAL )

  3. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY 
    1. Support the differential carrier with a jack.
      NOTE: Do not drop the differential carrier.
    2. Remove the 3 bolts and differential carrier.
    NOTE:
    • Do not damage the installation surface when removing the differential carrier assembly.
    • The remaining oil may leak out when removing the differential carrier assembly.
    Fig 1: Identifying Front Differential Carrier Assembly Bolts
    G04046989Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals