Front Door Belt Molding: Removal
- REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG (See DISASSEMBLY
)
- REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (See Step 2 in DISASSEMBLY
)
- REMOVE COURTESY LIGHT ASSEMBLY (See Step 3 in DISASSEMBLY
)
- REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (See Step 4 in DISASSEMBLY
)
- REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP (See Step 6 in DISASSEMBLY
)
- REMOVE FRONT DOOR FRAME COVER
- Remove the nut and front door frame cover.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT DOOR BELT MOLDING ASSEMBLY
- Fully open the front door glass.
- Put protective tape on the door below the front door belt molding assembly.
- Using a molding remover, disengage the 7 clips and remove the front door belt molding assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002