Rain Sensor: Removal

REMOVE RAIN SENSOR
1. Release the stopper by pulling it down.
  
  Fig 1: Releasing Stopper By Pulling It Down
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the connector and remove the rain sensor.
Fig 2: Identifying Rain Sensor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CLEAN WINDSHIELD GLASS
NOTE:
- The rain sensor tape can be reused, however, replace it with a new one if it has dirt on it or it is damaged.
- Check that the rain sensor tape does not remain on the windshield glass. If it does, remove it before installing the rain sensor.