Rear Combination Light Assembly: Reassembly
- INSTALL REAR LIGHT LENS
- INSTALL REAR LIGHT SOCKET AND WIRE
- Connect the connector.
- Install the rear light socket and wire.
- INSTALL BACK UP LIGHT BULB
- Install the back up light bulb.
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
- INSTALL REAR COMBINATION LIGHT BODY GASKET
- Remove the release paper from a new rear combination light body gasket.
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NOTE:
- Be sure to remove the all traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
- Align the rear combination light body gasket with the 3 stud bolts and install the gasket as shown in the illustration.
- INSTALL REAR COMBINATION LIGHT LENS AND BODY
- INSTALL REAR LIGHT SOCKET AND WIRE
- Connect the connector and install the rear light socket and wire.
- INSTALL REAR TURN SIGNAL LIGHT BULB
- Install the rear turn signal light bulb.
- INSTALL REAR COMBINATION LIGHT BODY GASKET
- Remove the release paper from a new rear combination light body gasket.
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NOTE:
- Be sure to remove the all traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
- Align the rear combination light body gasket with the 3 stud bolts and install the gasket as shown in the illustration.
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.