LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Motors, Switches, Relays >> OEM System Circuits >> Engine Control for 4GR-FSE >> : Connector Joining Wire Harness and Wire Harness

: Connector Joining Wire Harness and Wire Harness

Code See Joining Wire Harness and Wire Harness (Connector Location)
AE1 [4GR-FSE] Engine Room Main Wire and Engine Wire (Inside of the ECU Box)
AQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Engine Room Main Wire and Floor No.2 Wire (Upper the Cowl Side Panel LH)
BA2 [4GR-FSE] Engine Room No.2 Wire and Engine Room Main Wire (Inside of the Engine Room R/B No.2)
EG1 [4GR-FSE] Engine Wire and Engine No.5 Wire (Rear Side of the Left Cylinder Head)
JA3 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Engine Room Main Wire (Left Kick Panel)
JA4 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Engine Room Main Wire (Right Kick Panel)
JQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Floor No.2 Wire (Left Kick Panel)
MQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Front Door LH Wire and Floor No.2 Wire (Cowl Side Panel LH)
MQ2
PQ2 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS; : LOCATION OF GROUND POINTS Floor No.1 Wire and Floor No.2 Wire (Right Side of the Rear Floor Partition Panel)
ZE1 [4GR-FSE] Ignition Coil Wiring Sub Assembly and Engine Wire (Upper the Left Cylinder Head)
ZE2