LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> OEM System Circuits >> Turn Signal and Hazard Warning Light >> : Connector Joining Wire Harness and Wire Harness

: Connector Joining Wire Harness and Wire Harness

Code See Joining Wire Harness and Wire Harness (Connector Location)
BA2 [2GR-FSE] Engine Room No.2 Wire and Engine Room Main Wire (Inside of the Engine Room R/B No.2)
[4GR-FSE]
MQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Front Door LH Wire and Floor No.2 Wire (Cowl Side Panel LH)
MQ2
PQ2 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS; : LOCATION OF GROUND POINTS Floor No.1 Wire and Floor No.2 Wire (Right Side of the Rear Floor Partition Panel)