LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> OEM System Circuits >> ABS, TRAC and VSC >> : Connector Joining Wire Harness and Wire Harness

: Connector Joining Wire Harness and Wire Harness

Code See Joining Wire Harness and Wire Harness (Connector Location)
AP1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Engine Room Main Wire and Floor No.1 Wire (Upper the Cowl Side Panel RH)
AQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Engine Room Main Wire and Floor No.2 Wire (Upper the Cowl Side Panel LH)
JA3 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Engine Room Main Wire (Left Kick Panel)
JA4 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Engine Room Main Wire (Right Kick Panel)
VA1 [4GR-FSE] Skid Control Sensor Wire Front RH and Engine Room Main Wire (Front Side of the Right Fender Apron)
WA1 [4GR-FSE] Skid Control Sensor Wire Front LH and Engine Room Main Wire (Front Side of the Left Fender Apron)
XP1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS; : LOCATION OF GROUND POINTS Skid Control Sensor Wire Rear RH and Floor No.1 Wire (Right Side of the Rear Floor Partition Panel)
YQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS; : LOCATION OF GROUND POINTS Skid Control Sensor Wire Rear LH and Floor No.2 Wire (Left Side of the Rear Floor Partition Panel)